FLASHING OF SEMC ODM PHONES ( Se tool FAQ )
FLASHING OF SEMC ODM PHONES
1. select correct model
2. use com/ufs as interface
3. add to firmware area needed firmware
4. press flash
UNLOCKING OF SEMC ODM PHONES
broadcomm based - z300,j210,j220
1. select model
2. select com/ufs as interface
3. uncheck all settings
4. press unlock
5. power on phone with unsupported sim card, press *<<*, enter readed codes.
if you have "not allowed" while entering codes, just reflash phone
calypso lite based - j110,j120,k200,k220
1. select model
2. select com/ufs as interface
3. uncheck all settings
4. press unlock
for k200,k220 that is full unlock and security zone will be automatically fixed.
for j110,j120 that is special firmware patch - after unlock, power on phone, press *<<* with unsupported card and enter any 8 digits as code for each lock.
phone will accept code and unlock will be permanent.
note, that j110,j120 phone with damaged security zone is not supported.
POSSIBLE PROBLEMS WITH ODM PHONES.
phone hang, can't save photo,etc
1. write repair flash from support area
2. unlock phone
3. flash phone with latest firmware
note, that k200,k220 has two flash ic types, select samsung repair flash if you flash manu id=0xEC,
select spansion repair flash for all other types.
0 comments:
Post a Comment