POSSIBLE PROBLEMS ( Se tool FAQ PDA Phones )
POSSIBLE PROBLEMS
DB200X+NEXPERIA
damaged SCRC (imei mismatch), damaged seczone, damaged gdfs
1. go to emptyboard tab
2. select model
3. on settings, check "signed mode", fill login details
4. press reset, connect phone
5. if gdfs structure okay, skip that step, otherwise add to firmware are gdfs in ssw format: one of
DB2001_G700_GDFS_IN_SSW_FORMAT.SSW
DB2001_M600_GDFS_IN_SSW_FORMAT.ssw
DB2001_P1_GDFS_IN_SSW_FORMAT.ssw
DB2001_P990_GDFS_IN_SSW_FORMAT.ssw
for m600,w950,p990: pda_ccpu_convert_red49_BROWN_CID49_DB2001.software
for w960,p1
da_ccpu_convert_red53_BROWN_CID49_DB2001.software
7. press flashfor w960,p1
da_ccpu_convert_red53_BROWN_CID49_DB2001.software8. reflash phone on usual PDA tab if needed.
phone could not boot using dcu60, erom version timeout error,etc
acpu erom damaged, to restore it
1. select correct PDA model
2. find corresponding EROM in dist\eroms\, add it to firmware area
3. select correct com/ufs port
4. press recovery
5. connect turned off phone
6. reflash phone via USB with normal firmware
S1 OPEN
phone could not boot and blinks red
unlock phone using full signature unlock
phone stuck on white screen
reflash phone
phone stuck on white screen,reflashing and unlocking not helps
0 comments:
Post a Comment